How to Restore and Backup System Disk Content¶
- How to Restore and Backup System Disk Content
- Connect monitor to Monitor Output of CURRERA.
- Connect BOB144 to the CURRERA
- Connect USB Hub into USB connector of BOB144.
- Connect keyboard to USB Hub.
- Connect System Image Recovery USB Stick to USB Hub.
Each camera is set for USB booting from factory.
If boot device settings was changed - set First boot device to USB device in the BIOS settings.
It can be opened by repeated pressing Delete key on connected keyboard after power up.
After power up the booting of Image Manager should have started automatically and finished by displaying of Image Manager Menu.
Note: In case when Image Manager does not start booting - please connect System Image Recovery USB Stick to another port of USB hub and power off/on the CURRERA to retry booting.
Image Manager Menu¶
Following menu shows on the display when Image Manager has started.
Restore Factory System Disk Image¶
Restore Custom System Disk Image¶
Press 2 and Enter on keyboard to start restoring Custom Image.
The image is restored from USB (file images/currera_custom.tbi) to CURRERA's System Disk Content.
Backup Custom System Disk Image¶
Press 3 and Enter on keyboard to start backup of current CURRERA's System Disk to USB as Custom Image.
The image is backed up to USB to file images/currera_custom.tbi.
After selected operation is done, you will be prompted to remove System Image Recovery USB Stick and press Enter.
Use of Custom System Disk Images¶
You can store your Custom System Disk Images on your other backup disk;
For example for different stages of development.
Later they can be restored to CURRERA to return System Disk to previous status.
Both images, Factory System Disk Image and Custom System Disk Image are stored on the System Image Recovery USB Stick in directory images.