Products xiLab - Application specific custom OEM Cooled CCD scientific cameras with USB3 OnSemi KAI-08052 USB3 color Scientific grade Cooled camera

OnSemi KAI-08052 USB3 color Scientific grade Cooled camera

OnSemi KAI-08052 USB3 color Scientific grade Cooled camera
KAI sensors will be DISCONTINUED in 2020
  • 8.1 Megapixels, 4/3", Color, CCD, KAI-08052
  • USB3.1 Gen1
  • Ultra compact camera. Peltier Cooled
  • Bus powered over USB3 cable


Specifications are preliminary and subject to change


Scientific grade, compact camera for: Flat panel inspection, Microscopy, Ophthalmology, Pathology, Histology, Intelligent Traffic Systems, Fluorescence, Low light, Bar code reading, Cytometry and Cellometry, Astronomy, Digital Radiography, Bioluminescence, Biology, Chemiluminescence and many more.



Models page


Support page



Part Number MJ081CC-TS
Resolution 8.1 MP 3296 x 2472 pixels
Frame rates 20 Fps (52MHz overclocked mode), 10 Fps
Sensor type CCD RGB Bayer Matrix
Sensor model KODAK KAI-08052
Sensor size 4/3"
Sensor active area 18.13 mm x 13.60 mm
Readout Method Global shutter
Pixel size 5.5 μm
ADC -Bits per pixel 16
Data interface USB 3.1 Gen1 Type C
Dynamic range 70 - 80 dB
Full Well Capacity 20 000 e-
On-chip binning 1x1, 2x2, 4x4, 8x8
Readout noise typ. 2.2 - 8.5 e− rms (Cooled - Normal)
Signal to noise ratio 44 dB
Gain range 2.5 cnt/e-
Data I/O GPIO 1IN, 1OUT, Serial Port
Power consumption 3.5 W - 16 W with Cooling
Lens mount C or M42 mount
Weight 170 grams
Dimensions WxHxD 50 x 50 x 55 mm
Cooling Up to -25°C (Peltier TEC)
Customs tariff code 8525.80 30 (EU) / 8525.80 40 (USA)
Last Updated: 05 July 2020, 04:22

Follow XIMEA on


YouTube XIMEA              facebook XIMEA



Instagram XIMEA              twitter XIMEA



                   linkedin XIMEA


Build your Embedded application

Check our concept for Multi-camera aggregation 


Embedded Vision system camera USB3 fast small multiple


Contact us about your Embedded Vision needs!